Mercedes-Benz CLS Coupe 2018, Дополнение к руководству пользователя

Страница: 20 / 29

#
Remove the load compartment cover and the
load protection net.
#
For an upper anchorage strap with one belt
strap, route the upper anchorage strap under
the head restraint 1 between the two head
restraint bars.
#
For an upper anchorage strap with two belt
straps, route the upper anchorage strap on
the left and right past the side of the head
restraint 1 .
#
Securely fasten the attachment clip, which is
part of the upper anchorage strap, to the
upper anchor fitting 2 on the back of the
rear seat backrest.
#
Make sure that upper anchorage is not twis‐
ted.
#
Tension upper anchorage strap. Comply with
the manufacturer's installation instructions
when doing so.
#
Move head restraint 1 back down again
slightly if necessary. Make sure that you do
not interfere with the correct routing of
upper anchorage strap.
GLE and GLE Coupé
The upper anchorage points are located on the
rear side of the rear seat backrests.
#
Move head restraint 3 upwards.
#
For an upper anchorage strap with one belt
strap, route the upper anchorage strap under
the head restraint 3 between the two head
restraint bars.
#
For an upper anchorage strap with two belt
straps, route the upper anchorage strap on
the left and right past the side of the head
restraint 3 .
#
Guide upper anchorage strap downwards
between luggage compartment cover 1 and
rear seat backrest 2 .
#
Securely fasten the attachment clip, which is
part of the upper anchorage strap, to the
upper anchor fitting 4 .
Ensure that:
R
Upper anchor attachment is securely fas‐
tened to the upper anchor fitting 4 .
R
Upper anchorage strap is not twisted.
R
Upper anchorage strap is routed between
rear seat backrest 2 and luggage compart‐
ment cover 1 if luggage compartment cover
1 is fitted.
R
Upper anchorage strap is routed between the
rear seat backrest 2 and the safety net if
the safety net is fitted.
#
Tension upper anchorage strap. Comply with
the manufacturer's installation instructions
when doing so.
#
Move head restraint 3 back down again
slightly if necessary. Make sure that you do
18
Changes as compared to the Owner's Manual