Mercedes-Benz CLS Coupe 2018, Дополнение к руководству пользователя

Страница: 18 / 29

#
Move head restraint 1 upwards.
#
Remove combined luggage cover and net 3 .
#
For an upper anchorage strap with one belt
strap, route the upper anchorage strap under
the head restraint 1 between the two head
restraint bars.
#
For an upper anchorage strap with two belt
straps, route the upper anchorage strap on
the left and right past the side of the head
restraint 1 .
#
Securely fasten the attachment clip, which is
part of the upper anchorage strap, to the
upper anchor fitting 4 on the back of the
rear seat backrest 2 .
#
Tension upper anchorage strap. Comply with
the manufacturer's installation instructions
when doing so.
#
Make sure that upper anchorage strap is not
twisted.
#
Move head restraint 1 back down again
slightly if necessary. Make sure that you do
not interfere with the correct routing of
upper anchorage strap.
#
Replace combined luggage cover 3 .
E-Class Coupé
The upper anchorage points are installed in the
rear compartment behind the head restraints on
the parcel shelf.
#
Move head restraint 1 upwards.
#
Fold up cover 2 of upper anchorage point
3 .
#
Guide upper anchorage strap under head
restraint 1 between the two head restraint
rods.
16
Changes as compared to the Owner's Manual