Mercedes-Benz CLS Coupe 2018, Дополнение к руководству пользователя

Страница: 11 / 29

Vehicles with through-loading facility
Vehicles without through-loading facility
#
Move head restraint 1 upwards.
#
Release rear seat backrest 3 and fold it for‐
wards.
#
For an upper anchorage strap with one belt
strap, route the upper anchorage strap under
the head restraint 1 between the two head
restraint bars.
#
For an upper anchorage strap with two belt
straps, route the upper anchorage strap on
the left and right past the side of the head
restraint 1 .
#
Securely fasten the attachment clip, which is
part of the upper anchorage strap, to the
upper anchor fitting 4 .
Ensure that:
R
upper anchorage strap is not twisted.
R
upper anchorage strap is routed between
rear seat backrest 3 and luggage compart‐
ment cover 2 if luggage compartment cover
2 is fitted.
#
Swing back rear seat backrest 3 until it
engages.
The red lock verification indicator is no lon‐
ger visible.
#
Tension upper anchorage strap. Comply with
the manufacturer's installation instructions
when doing so.
#
Move head restraint 1 back down again
slightly if necessary. Make sure that you do
not interfere with the correct routing of
upper anchorage strap.
CLA
The upper anchorage points are fitted in the rear
compartment behind the outer head restraints
on the parcel shelf.
There is also another upper anchorage point
behind the central rear seat.
Changes as compared to the Owner's Manual
9