X
Remove filler hose
B
and connector
=
from
the bottom section of tire inflation compres-
sor housing
;
.
X
Slide the yellow filler hose connector into the
mounting on yellow cap
A
of tire sealant filler
bottle
:
until the connector engages.
X
With the sealing rings in front, slide yellow cap
A
of tire sealant bottle
:
into the mounting
of tire inflation compressor
;
. The cap must
engage in both hooks.
X
Remove the cap from valve
C
on the faulty
tire.
X
Screw filler hose
D
onto valve
C
.
X
Insert plug
=
into cigarette lighter socket
(
Y
page 265) or into another 12 V socket in
your vehicle (
Y
page 266).
X
Turn the SmartKey to position
1
in the igni-
tion lock (
Y
page 122).
X
Press on and off switch
?
on the tire inflation
compressor to ON position.
The tire inflation compressor is switched on.
The tire is inflated.
First, tire sealant is pumped into the tire. The
pressure may briefly rise to approximately
500 kPa (5 bar/73 psi).
Do not switch off the tire inflation com-
pressor during this phase.
X
Let the tire inflation compressor run for a
maximum of ten minutes. The tire should then
have attained a pressure of at least 200 kPa
(2.0 bar/29 psi).
If a pressure of 200 kPa (2.0 bar/29 psi) has
been attained after five minutes, see "Tire pres-
sure reached" (
Y
page 296).
If a tire pressure of 200 kPa (2.0 bar/29 psi) has
not been attained after five minutes, see "Tire
pressure not reached" (
Y
page 295).
If tire sealant has escaped, clean it off affected
areas as quickly as possible. Use plain water if
possible.
If your clothes are soiled with tire sealant, have
them cleaned with perchloroethylene at a dry
cleaner as soon as possible.
Tire pressure not reached
If a tire pressure of 200 kPa (2.0 bar/29 psi) has
not been attained after ten minutes:
X
Switch off the tire inflation compressor.
X
Unscrew the filler hose from the valve of the
faulty tire.
Tire sealant may escape when the filler hose is
unscrewed.
X
Very slowly drive forwards or reverse approx-
imately 30 ft (10 m).
X
Pump up the tire again.
After a maximum of ten minutes, the tire pres-
sure must be at least 200 kPa (2.0 bar/
29 psi).
G
WARNING
If the required tire pressure is not reached
after the specified time, the tire is too badly
damaged. The tire sealant cannot repair the
tire in this instance. Damaged tires and a tire
pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
Flat tire
295
Bre
akdown
assistance
Z
Содержание C-CLASS CABRIOLET
Страница 345: ...343 ...
Страница 346: ...344 ...
