Mercedes-Benz ACTROS 2002, Руководство по эксплуатации

Страница: 55 / 620

50
Getting started
Driving
1
2
3
4
5
6
7
8
9
Further information can be found in the
"Controls in detail" section (
page 125).
Reservoir pressure in the compressed-
air system
There must be sufficient reservoir pressure
in the following pressure circuits before a
journey is started:
in brake circuit 1 or 2
3
– the event
message with red status display must
go out
in the spring actuator pressure circuit –
the
!
indicator lamp in the instru-
ment panel must go out
in the auxiliary consumers circuit
Œ
– the event message with yellow status
display must go out
Event messages in the multi-function dis-
play indicate insufficient reservoir pres-
sures. At the same time the STOP lamp will
light up.
i
Vehicles with hot-water auxiliary heat-
ing: At ambient temperatures below
–20 °C, pre-heat the engine before
starting (
page 327).
After the engine has been started
Risk of accident
G
If the reservoir pressure in the compressed-
air system is too low it will not be possible to
brake the vehicle or to change gear. The op-
erating reliability and road safety of the ve-
hicle are jeopardised. Do not start off until
the reservoir pressures have been reached
and the STOP lamp goes out.