Mercedes-Benz ACTROS 2002 Скачать руководство пользователя

Страница: 17 / 620

Introduction

Operating safety

So that Mercedes-Benz can vouch for reli-
ability, safety and suitability, the following
should be observed:

Do not exchange Mercedes-Benz origi-
nal parts or authorised conversion
parts or accessories for other parts

Do not modify the vehicle in any other
way

Only manufacture and assemble con-
version parts in accordance with the
Mercedes-Benz Body and Implement
Mounting Directives

Authorisation from Mercedes-Benz
should be sought should there be any
deviation from the Mercedes-Benz
Body and Implement Mounting Direc-
tives

Observe the following information when
using your vehicle:

the entire Operating Instructions, safe-
ty notes

the "Technical data" section in these
Operating Instructions

national road traffic regulations

national road traffic licensing regula-
tions

Acceptance or approval granted by offi-
cial test centres or the issue of official
permits does not rule out safety risks.

Further information is available from
any Mercedes-Benz Service Centre.

Correct use

Risk of injury

Various warning stickers are attached to

your vehicle. Their purpose is to make you

and others aware of various risks. You

should not, therefore, remove any of these

warning stickers unless expressly instructed

to do so by information on the sticker itself.

If you remove these warning stickers, you or

others may fail to recognise certain risks.

The result of this could be injury to yourself

or others.

Содержание ACTROS 2002













































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ACTROS 2002

Отзывы:

Похожие инструкции для ACTROS 2002

Бренды по названию

Популярные бренды

Mercedes-Benz ACTROS 2002, Руководство по эксплуатации

Результаты поиска

Содержание ACTROS 2002

Отзывы:

Похожие инструкции для ACTROS 2002

Бренды по названию

Популярные бренды