Mercedes-Benz ACTROS 2002, Руководство по эксплуатации

Страница: 507 / 620

502
Practical advice
Wheels and tyres
1
2
3
4
5
6
7
8
9
Screw on remaining wheel nuts with
spherical spring washers.
Tighten wheel nuts in a diagonal pat-
tern. Observe correct tightening torque
(
page 577).
The tyre inflator connection is on the front
of the compressed-air drier and has an in-
tegral pressure regulator.
Compressed-air drier (example)
1
Tyre inflator connection
!
Ensure correct centering. The wheel
bolts must located centrally in the
holes of the wheel.
Tyre inflator connection
!
Only use the tyre inflator connection
for inflating tyres.
As far as possible do not charge the
compressed-air system via the tyre in-
flator connection. The compressed air
is then neither cleaned nor dried. Pres-
sure protection is not provided via the
pressure regulator.
Risk of injury
G
If you inflate tyres to an excessive pressure
they can explode.
In order to inflate tyres, reduce charge pres-
sure in the compressed-air system to ap-
proximately 6 bar.
Do not exceed a maximum tyre inflation
pressure of 10 bar. The tyres can explode.