Mercedes-Benz 280 C, Руководство пользователя

Страница: 310 / 337

!
Only use fuses that have been approved for
Mercedes-Benz vehicles and which have the
correct amperage for the system concerned.
Otherwise, components or systems could be
damaged.
The fuses are located in various fuse
boxes:
I Fuse box under the dashboard* on the
driver's side
I Fuse box in the engine compartment
on the driver's side
I Fuse box in the boot on the right when
viewed in the direction of travel
Fuse allocation chart
The fuse allocation chart is located with
the vehicle tool kit (
e
page 223) in the
stowage well under the boot floor
(
e
page 181). The fuse amperage is also
indicated here.
Before changing a fuse
E
Park the vehicle.
E
Switch off all electrical consumers.
E
Remove the key from the ignition lock.
Fuse box in the dashboard*
1
Cover
2
To remove the cover
3
To release the cover
E
To open: open the driver
’
s door.
E
Pull out cover
1
slightly at the bottom
3
.
E
Pull cover
1
outwards and remove it
2
.
E
To close: clip in cover
1
at the front.
E
Fold cover
1
inwards until it engages.
E
Close the driver's door.
Fuse box in the engine compartment
E
Make sure that the windscreen wipers
are turned off.
G
Risk of injury
Make sure that the windscreen wipers are
turned off and the key is pulled out of the
ignition lock before you open the cover of
the fuse box. Otherwise, the windscreen
wipers and their wiper rods above the cover
could be set in motion. This could lead to
parts of the body being trapped by the wiper
rods.
E
To open: open the bonnet
( e page 195).
Practical advice
Fuses
308
Nur fuer internen Gebrauch Nur fuer internen Gebrauch