Mercedes-Benz 280 C, Руководство пользователя

Страница: 286 / 337

i
When inserting the batteries, make sure
that they are clean and lint-free.
E
Check the function of all key buttons
on the vehicle.
Changing the bulbs
Notes on changing bulbs
Bulbs and lamps are an important aspect
of vehicle safety. You must therefore make
sure that all bulbs function correctly at all
times.
G
Risk of injury
Bulbs and lamps can be very hot. You
should therefore allow them to cool down
before you change them. Otherwise, you
could be burned if you touch them.
Keep bulbs out of the reach of children. Oth-
erwise, they could damage them, for exam-
ple, and injure themselves.
Never use a bulb which has been dropped.
Such a bulb may explode and injure you.
H7 bulbs are pressurised and could explode
when you change them, particularly if they
are very hot. You should therefore wear eye
protection and gloves when you are chang-
ing them.
G
Risk of injury
Bi-xenon* bulbs carry a high voltage. You
could get an electric shock and be seriously
or fatally injured if you touch the electric
contacts on bi-xenon* bulbs. Do not, there-
fore, remove the cover from bi-xenon*
bulbs.
Do not change bi-xenon* bulbs yourself, but
have them replaced at a qualified specialist
workshop which has the necessary special-
ist knowledge and tools to carry out the
work required.
Mercedes-Benz recommends that you use a
Mercedes-Benz Service Centre for this pur-
pose. In particular, work relevant to safety
or on safety-related systems must be car-
ried out at a qualified specialist workshop.
i
If one of the following bulbs fails, another
bulb will take over its function:
I Turn signals
I Brake lamps
I
Parking lamp
I Tail lamps
Practical advice
Changing the bulbs
284
Nur fuer internen Gebrauch Nur fuer internen Gebrauch