positions for a short time. This is rectified after a
few minutes of driving; the tire pressures are
then displayed for the correct positions.
Restarting the tire pressure monitor
General notes
When you restart the tire pressure monitor, all
existing warning messages are deleted and the
warning lamp goes out. The monitor uses the
currently set tire pressures as the reference val-
ues for monitoring. In most cases, the tire pres-
sure monitor will automatically detect the new
reference values after you have changed the tire
pressures. However, you can also define refer-
ence values manually as described here. The tire
pressure monitor then monitors the new tire
pressure values.
Vehicles without steering wheel buttons
The vehicle must be stationary. Use the buttons
in the instrument cluster.
X
Turn the key to position 2 in the ignition lock.
X
Press
È
to select the
Tire
Tire Pressure
Pressure
menu.
X
Press
3
to confirm.
The display shows the
Monitoring Active
Monitoring Active
message.
X
Press
3
to confirm.
The display shows the
Tire Pressure OK?
Tire Pressure OK?
message.
If you wish to confirm the restart:
X
Press the
f
button.
The display shows the distance menu.
After you have driven for a few minutes, the
system checks whether the current tire pres-
sures are within the specified range. The new
tire pressures are then accepted as reference
values and are monitored.
If you wish to cancel the restart:
X
Press
g
.
The display shows the tire pressure menu.
The tire pressure values stored at the last
restart will continue to be monitored.
Vehicles with steering wheel buttons
Using the steering wheel buttons
X
Make sure that the tire pressures of all four
wheels are set correctly for the current oper-
ating conditions. When doing so, observe the
notes under "Tire pressure" (
Y
page 271).
X
Turn the key to position 2 in the ignition lock.
X
Press
=
or
;
to select the
Service
Service
menu.
X
Press
9
or
:
to select the
Tire
Tire Pres‐
Pres‐
sure
sure
submenu.
X
Press
a
to confirm.
The display shows either the current tire pres-
sure for the individual tires, or the
Tire
Tire
pressure will be displayed after
pressure will be displayed after
driving a few minutes
driving a few minutes
message.
X
Press the
:
button.
The display shows the
Use Current Pres‐
Use Current Pres‐
sures as New Reference Values:
sures as New Reference Values:
mes-
sage.
If you wish to confirm the restart:
X
Press the
a
button.
The display shows the
Tire Press. Moni‐
Tire Press. Moni‐
tor Restarted
tor Restarted
message.
After you have driven for a few minutes, the
system checks whether the current tire pres-
sures are within the specified range. The new
tire pressures are then accepted as reference
values and are monitored.
If you wish to cancel the restart:
X
Press the
%
button.
The tire pressure values stored at the last
restart will continue to be monitored.
278
Tire pressure
Wheels
and
tir
es
Содержание 2016 Metris
Страница 27: ...Replacing windshield 104 Service indicator 104 Workshop see Qualified specialist workshop Index 25...
Страница 309: ...307...
Страница 310: ...308...