Mercedes-Benz 2014 G-Class, Руководство оператора

Страница: 139 / 272

X
Using a torque wrench, tighten nut B with
a torque of 516 lb-ft (700 Nm).
X
Check that thread C protruding below nut
B has the minimum required length of
0.32 in (8 mm).
X
Check the assembled ball coupling for
correct installation.
i
Also observe the height of the trailer
coupling and the trailer manufacturer's
instructions.
i
Depending on the height of the trailer
coupling, you may have to turn the ball
coupling 180° to install it on the ball
coupling carrier. The assembly is otherwise
identical.
Installing the ball coupling
G
WARNING
If the ball coupling is not installed correctly or
not secured with the bolt provided and the
corresponding spring cotter, the trailer may
come loose. There is a risk of an accident.
Always install and secure the ball coupling as
described. Before every journey, ensure that
the ball coupling is secured with the bolt and
the corresponding spring cotter.
G WARNING
If the ball coupling is not installed and secured
correctly it can become detached while the
vehicle is in motion and fall onto the road.
There is a risk of accident and injury.
Always install and secure the ball coupling as
described. Before every journey, ensure that
the ball coupling is secured with the bolt and
the corresponding spring cotter.
X
Pull protective cap = in the direction of the
arrow, out of the ball coupling recess.
X
Insert the ball coupling horizontally into ball
coupling recess ? in the direction of the
arrow until the hole in ball coupling A is in
line with the hole in ball coupling recess
B .
Towing a trailer
137
Driving
and
parking
Z