Mercedes-Benz 2013 S-CLASS, Руководство пользователя

Страница: 73 / 493

Suitable positioning of the child
restraint system
Introduction
Only child restraint systems which are
approved in accordance with the ECE stand-
ard ECE R44 are permitted for use in the vehi-
cle.
Child restraint system on the front-
passenger seat – if it is absolutely necessary
to secure a child in a child restraint system
on the front-passenger seat:
X
Always pay attention to the instructions
under "Child restraint system on the front-
passenger seat" (
Y
page 66).
There you will find instructions on how to
correctly route the shoulder belt strap from
the vehicle belt sash guide to the shoulder
belt guide on the child restraint system
(
Y
page 68).
X
move the front-passenger seat as far back
as possible.
If you secure a child in a forward-facing
child restraint system on the front-
passenger seat, also move the front-
passenger seat to the lowest position.
X
Move the backrest to an almost vertical
position.
The bottom and back of a forward-facing
child restraint system must make full con-
tact with the front-passenger seat cushion
and backrest. The child restraint system
must not touch the roof or be put under
strain by the head restraint. Adjust the
angle of the seat backrest and the head
restraint position accordingly. Also observe
the child restraint system manufacturer's
installation instructions.
X
Move the seat cushion angle to the highest,
most vertical position.
For certain child restraint systems in weight
categories II or III, this can mean that the area
of use is restricted. The maximum size setting
of the child restraint system is not possible
due to possible contact with the roof.
"Universal" category child restraint systems
can be recognised by their orange approval
label and the text "Universal".
Example: approval label on the child restraint sys-
tem
"Universal" category child restraint systems
can be used on the seats indicated with U, UF
or IUF according to the tables "Suitability of
the seats for attaching belted child restraint
systems" or "Suitability of the seats for
attaching an ISOFIX child restraint system".
Semi-universal child restraint systems are
indicated by the text "Semi-universal" on the
approval label. These can be used if the vehi-
cle and the seat are listed in the child restraint
system manufacturer's vehicle model list. For
more information, contact the child restraint
system manufacturer or visit their website.
Suitability of the seats for attaching bel-
ted child restraint systems
If you use a baby car seat of category 0 or 0+
or a rearward-facing child restraint system of
category I on a rear seat, you must adjust the
driver's or front-passenger seat so that the
seat does not touch the child restraint sys-
tem.
Legend for the table:
X Seat which is unsuitable for children in
this weight category
U Suitable for child restraint systems in the
"Universal" category that are approved
for use in this weight category
UF Suitable for forward-facing child
restraint systems that belong to the "Uni-
70
Children in the vehicle
Sa
fet
y