Mercedes-Benz 2013 S-CLASS, Руководство пользователя

Страница: 159 / 493

1
$ Windscreen wipers off
2
Ä Intermittent wipe, low (rain sensor
set to low sensitivity)
3
Å Intermittent wipe, high (rain sensor
set to high sensitivity)
4
° Continuous wipe, slow
5
¯ Continuous wipe, fast
B
í Single wipe/ î to wipe the wind-
screen using washer fluid
X
Switch on the power supply with the Start/
Stop button or the key (
Y
page 191).
X
Turn the combination switch to the corre-
sponding position.
In the Ä or Å position, the appropriate
wiping frequency is set automatically accord-
ing to the intensity of the rain. In the Å
position, the rain sensor is more sensitive
than in the Ä position, causing the wind-
screen wipers to wipe more frequently.
i
Vehicles with MAGIC VISION CONTROL:
the washer fluid is fed through the wiper
blades and when wiping with washer fluid
î the washer fluid is emitted directly
from the blades.
If the wiper blades are worn, the windscreen
will no longer be wiped properly. This could
prevent you from observing the traffic condi-
tions.
Replacing the wiper blades
Important safety notes
G
WARNING
If the windscreen wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm. There is a risk of
injury.
Always switch off the windscreen wipers and
ignition before changing the wiper blades.
!
To avoid damaging the windscreen wiper
blades, make sure that you touch only the
wiper arm of the windscreen wiper.
!
Never open the bonnet if a windscreen
wiper arm has been folded away from the
windscreen.
Never fold a windscreen wiper arm without
a wiper blade back onto the windscreen.
Hold the windscreen wiper arm firmly when
you change the wiper blade. If you release
the windscreen wiper arm without a wiper
blade and it falls onto the windscreen, the
windscreen may be damaged by the force
of the impact.
Mercedes-Benz recommends that you have
the wiper blades changed at a qualified
specialist workshop.
!
Always position the windscreen wiper
arms vertically before folding them away
from the windscreen. By doing so, you will
avoid damage to the bonnet.
Replacing the wiper blades (standard
windscreen wipers)
Moving the wiper blades to a vertical posi-
tion
X
Turn the key to position 0 in the ignition
lock (
Y
page 191).
X
Set the windscreen wipers to the °
position.
X
Turn the key to position 1 in the ignition
lock (
Y
page 191).
156
Windscreen wipers
Lights
and
windscreen
wipers