against an occupant or object. The seat will
slide forward and stop.
Investigate and correct the cause of
interruption.
Now use memory button or seat
adjustment switch to bring the seat into the
desired position.
When folding the seat backrest forward
from a reclined position, and then folding it
back, the seat backrest stops in a more
upright position for the safety of any rear-
seat passenger. Adjust the seat backrest
until your arms are slightly angled when
holding the steering wheel.
Head restraint fore and aft adjustment
X
Push or pull on the lower edge of the head
restraint cushion to the desired position.
Easy-entry/exit feature
This feature allows for easier entry into and
exit from the vehicle. When entering and
exiting the vehicle, the driver’s seat moves to
its most rearward position. The steering
wheel moves to its uppermost position.
With the easy-entry/exit feature activated
the steering wheel tilts upwards and the
driver’s seat moves to its most rearward
position
R
when you remove the SmartKey from the
starter switch,
or
R
when you open the driver’s door with the
SmartKey in starter switch position
0 or 1
or the KEYLESS-GO start/stop button in
position
1
The easy-entry/exit feature can be switched
on or off in the
Vehicle
menu of the
COMAND system (
Y
page 190).
G
Warning!
You must make sure no one can become
trapped or injured by the moving steering
wheel and driver’s seat when the easy-entry/
exit feature is activated.
To stop seat/steering wheel movement, do
one of the following:
R
Press seat adjustment switch.
R
Move steering wheel adjustment stalk.
R
Press one of the memory position buttons
or the memory button
M.
Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
!
Do not activate the easy-entry/exit
feature if the seat backrest is in an
excessively reclined position. Doing so
could cause damage to front or rear seats.
First move the seat backrest to an upright
position.
The steering wheel and driver’s seat will
return to their last set memory position or a
factory-set maximum forward position
R
when you close the driver’s door with the
ignition switched on
R
when you insert the SmartKey into the
starter switch
R
when you press the KEYLESS-GO start/
stop button once with the driver’s door
closed
Seats
267
Controls in detail
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 267
Z
