:
Lap number
;
Lap time
=
Maximum speed during lap
?
Lap length
A
Average speed during lap
X
Press button
:
or
9
to see other lap
analyses.
Telephone menu
G
Warning!
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the
telephone while driving, please use the hands-
free device and only use the telephone when
weather, road and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a mobile phone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
You can connect your telephone to the
COMAND system via Bluetooth
®
(
Y
page 138).
X
Switch on the telephone and the COMAND
system.
X
Press button
=
or
;
to select the
Telephone
menu.
One of the following messages will appear
in the multifunction display:
R
No service
: No network is available.
R
Ready for Bluetooth telephony...
:
The telephone has not been connected
to the COMAND system via Bluetooth
®
yet.
X
Connect the telephone to the
COMAND system via Bluetooth
®
(
Y
page 139).
R
Telephone Ready
or name of the
network provider (if available): The
telephone has found a network and is
ready for use. You can operate it using
the control system.
Answering a call
When your telephone is ready to receive calls,
you can answer a call at any time with the
ignition on. When you are in the
Telephone
menu, you will see the following message in
the multifunction display:
Example illustration
X
Press button
6
.
The caller’s number appears only if it is
transmitted.
The caller’s name appears only if the number
and the name are stored in the phone book.
Instrument cluster control system
211
Control systems
216_AKB; 3; 90, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-15T11:47:50+02:00 - Seite 211
Z
