Mercedes-Benz 201.024, Руководство по обслуживанию

Страница: 208 / 304

To do this hold in position with a fork wrench
(24 mm) on flats at the rear end of the camshaft.
Note
On vehicles with self-levelling suspension the
camshaft timing gear and driving sleeve are
attached by a bolt with hexagon recessed hole.
Take out the driving sleeve.
13 Remove camshaft timing gear.
14 Place cleaning rag over the timing case and
remove Woodruff key (6).
15 Insert selected Woodruff key.
16 Put on camshaft timing gear. In the process
note that the markings on the camshaft
timing gear and the timing chain align.
Do not torque the set bolt (9) yet.
17 Repeat test Numbers 6 and 7.
18 Torque camshaft timing gear set bolt (9) to
80 Nm. For this hold in position with a fork
wrench (24mm) on flats at the rear of the
camshaft.
05.0906