Matching
bearings and installing
15 Recondition
and check angles of
bearing bores relative to each other
16 Insert
bearing shells. Install
bearing cover with bearing shell and tighten
bolts to an initial torque of 30 Nm and
angle of rotation torque of 90”.
Note
bearing shells are supplied only in the
yellow version.
Measure bearing diameter and note.
18 Measure wrist pins, determine radial play of
bearings.
Note
If the
bearing play exceeds the specified
value, dress mating face of
bearing cover
on a surface plate to max. 0.02 mm.
19 Fit pistons to
and install (03-316).
Note
The
must be installed on the pistons so
that the
chamfered
splash bore in the small end
bearing (arrow) and the arrow in the piston
crown are facing the direction of travel.
03.0905 320113
Содержание 201.024
