Mercedes-Benz 2009 R-Class, Руководство оператора

Страница: 214 / 412

Loading and storing
212
moved to the rearmost position. Otherwise
you could damage the front and the
outboard second-row seats.
! Close the cup holders in front of the
second-row seats before folding the
second-row seats. Otherwise you could
damage the cup holders and the second-
row seats.
X
Move the seat to be folded to its rearmost
position (
Y
page 104).
X
Remove the rear center console, if so
equipped (
Y
page 222).
i
The rear center console can remain
installed, if installed in the most forward
position (
Y
page 223). However, the cargo
compartment floor will then not be an even
plane.
X
Remove the head restraint from the
respective second-row seat (
Y
page 105).
1
Seat backrest
2
Seat cushion
3
Release lever
X Place the head restraint on seat cushion
2
.
X Relieve the load on seat backrest
1
and
pull release lever
3
past the resistance
point in direction of arrow as far as it will
go.
Seat and seat backrest
1
are unlocked.
X
Fold seat backrest
1
forward until it fully
rests on seat cushion
2
in a horizontal
position.
1
Seat backrest
2
Seat cushion
X Push down on folded seat backrest
1
until
seat cushion
2
engages in seat base.
Folding third-row seats
X
Completely lower the head restraints of the
third-row seats.
i
The third-row head restraints are
adjusted in the same manner as the head
restraints of the second-row seats
(
Y
page 105).
Controls in detail