Mercedes-Benz 1982 380 SL, Руководство пользователя

Страница: 38 / 89

Radio
Direct frequency dialing
In order to select a station with a known frequency, select the wave band,
press the function button □
and then enter the frequency by pressing
the corresponding push buttons.
Example: FM 98.5 MHz
AM 1050 KHz
Press any button marked
EE
through E E
ED
through
EH
Press the function button a
a
ED S 3 ED
Enter frequency by pressing
EH ED E S
EB
When dialing a frequency directly, the number of thd push buttons is not
displayed on the panel. The wave band is indicated by showing “ MHz” for
FM or “ KHz” for AM.
Note:
All AM stations have allocated frequencies ending with a “0 ”.
All FM stations have allocated frequencies ending with an odd
(uneven) digit after the decimal point.
Broadcasters sometimes may not give their exact frequency but the next
closest even number.
US radio frequency ranges: AM 540 1 600 KHz
FM 88.1 - 107.9 MHz
Manual tuning (used to fine tune a
station or for manual scanning)
After selecting the desired AM or
FM wave band, press the function
control button □
Depress and hold the h '» 'rn n i
(left or right side) button. The
frequency will increase or decrease
respectively in increments of
0.1 MHz for FM or 1.0 KHz for AM.
Release the button when the
desired station is tuned in.
If,, after pressing the function
control □ , the station seeker bar
is not activated within
eight seconds, the manual tuning
mode is ended automatically.
Safety Note
To avoid distraction of attention
from the vehicle’s operation and
the road, it is recommended NOT
to perform any manual dialing
operations by the driver while the
vehicle is in motion. Use the
automatic station search operation
or preset stations instead.
Push button tuning
Six FM stations and four AM
stations can be stored in memory
and recalled by pressing the
appropriate buttons marked
EE
through E E for FM or HU through
m for AM stations.
To store stations in memory
Any FM station frequency displayec
on the panel can be stored on any
button marked E B through E B by
depressing the button desired and
holding it until the display has
changed from the “o ld” setting to a
“ blank” and then to the new
frequency to be stored.
36