Mercedes-Benz 1982 380 SL, Руководство пользователя

Страница: 40 / 89

Radio
Note:
This is a 24 hour clock and time
must be entered in all four digits.
A 24 hour clock counts time from
m idnight to midnight, that is 24
hours. A time of 4:28 PM therefore
is counted by this clo ck as 16:28
hours (12 plus 4:28 hours).
Example 1: To enter 7:30 AM,
press buttons
EZ3 > EZ3 • 0 3 > k ilil
Example 2: To enter 4:28 PM,
press buttons
EE
- S 3 . 0 3 . 0 3
The time entered is now stored. To
start the clock in accordance with
a time signal or other time refer­
ence, again briefly press the
recessed time set button
A colon sign will appear between
the second and third digits
to indicate that the clock is actived.
Normally, the display panel will
show the frequency the radio is
tuned to.
To display time
Briefly press the call button D •
The time will be displayed for a few
seconds.
To use timers e d or
EE
Timer
ED
can be used to auto­
matically turn the radio on at a
preset time. Timer ED can be used
to turn an accessory (e.g., seat
heating system) on at a preset
time. To set either timer, the ignition
key must be in position “ 1” or “2”.
Timer
ED
can only turn the radio
on with the ignition key in position
“ 1” or “2”. Timer E D can turn an
accessory on w ithout the ignition
key inserted in the lock.
To set timers
Press either
ED
or
ED
button, key
desired turn-on time into tim er as
explained under “setting of the
c lo c k ”. To activate timer, e.g., to
turn radio on at the preset time,
press □ A.colon sign will
appear between the second and
third digits to confirm activation.
If, at any time, you would like to
know the time either tim er is set
for, depress either button
ED
or
ED
. The time will be displayed on
the panel along with a No. 1 or 2
for the respective timer. After a few
seconds, the display will change
again to the station frequency
tuned to. To change the turn-on
time, proceed as outlined under “to
set tim ers”.
Note concerning timer
ED
To connect any accessory to this
timer, a special relay is required
which can be plugged into the
receptacle provided on the radio.
Separate instructions are required
for this operation.