Mercedes-Benz 1982 380 SL, Руководство пользователя

Страница: 68 / 89

Electrical System
>
Replacing Bulbs
To remove, push the bulb in and
turn to the left, then lift the bulb out.
To install, grip the bulb with a
paper tissue or similar cloth, align
the pins on the base of the bulb
with the grooves in the bulb socket,
push in lightly and turn to the right
until the stop is felt.
Install only bulbs of prescribed wat­
tage. Refer to “Technical Data and
last page”.
Headlamp Aiming
Correct headlamp aiming is of para­
m ount importance to the roadwor­
thiness of the car. Check and
readjust headlamps at regular inter­
vals and invariably when a lamp
has been replaced.
Front Lamps
1 Cover
2 Securing screws for cover
3 Horizontal aiming screws
4 Vertical aiming screws
5 High and low beam sealed-
beam unit (type
2
):
Loosen clamping screws
8
,
remove retaining ring and unit,
disconnect plug and socket
on unit.
6
High beam sealed-beam unit
(type
1
):
Loosen clamping screws 9,
remove retaining ring and unit,
disconnect plug and socket on
unit.
7 Side marker lamp:
Remove unit 5, loosen clamping
screw
10
and detach lamp
holder. Depress bulb, turn left
and pull out.
66