Meranus emily, Инструкция по установке и эксплуатации

Страница: 10 / 52

IN THE EVENT OF A PROBLEM…
Your robot is manufactured according to the strictest standards. To ensure complete
safety when using your appliance, please respect the following recommendations:
• Only connect the control unit to a plug, with a security residual current protection
system of 30 mA maximum.
• Make sure the socket outlet is always and easily accessible.
• The control unit must not be installed in an area where it is liable to get immersed.
• Make sure that the control unit is at least 3.5 metres from the edge of the pool,
and avoid exposure to direct sunlight.
• On no account should you ever allow anyone to swim while the robot is in the pool.
If by "accident", the control unit were to fall into the water, it is essential that you
unplug the electric supply before recovering the control unit.
• To avoid any risk of an electric shock, never open the electric control box.
Call a qualified technician.
• Never try to repair the mains power cable. Contact the Customer Services Department
to have it replaced, to avoid any danger.
• Do not use the appliance in your pool if the water temperature is above 35°C.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
This appliance has been designed and manufactured in accordance with the
following standards:
• In compliance with Electromagnetic compatibility 2004/108/EC and the standards:
EN 55014-1: 2000 +A1:2001 +A2:2002
EN 55014-2: 1997 +A1:2002
EN 61000-3-2: 2000 + A2:2005
EN 61000-3-3: 1995 + A1:2001 +A2:2005
• In compliance with Low Voltage Directive 2006/95/EC and the following standards:
EN 60335-1 : 2002 + A1:2004 + A2:2006 +A11:2004 + A12:2006
EN 60335-2-41 : 2003 + A1:2004.
Additional information concerning the CE symbol:
The Emily swimming pool cleaning robot conforms to the following directives:
• E.M.C. 89/336/CEE and 92/31/CEE;
• Low voltage 73/23/CEE.
Those to which it complies
The product has been tested under normal usage conditions.
SAFETY AND CONFORMITY
8 9
IN THE EVENT OF A PROBLEM…
RECOMMENDATIONS
• Although the water seems clear, your pool contains microscopic algae
(not visible to the naked eye), which are making the sides slippery and
are preventing the robot from climbing them. In this case, carry out an
express chlorination session and slightly lower the pH level.
Do not leave the robot in the water during the express treatment.
When starting, the robot is not moving at all
Check that the control unit’s mains plug is functioning correctly.
Check that you have indeed started a 3h or 1h30 cleaning cycle.
If the problem persists, contact your retailer.