Step 6 Installation of pedal plate
Putting the pedal plate(36R) into the pedal tube (34R) and aligning its hole, then inserting into the hole corresponding of the
pedal plate(36R) and the pedal tube (34R) in turn with the screw pump (35), then installing the plum blossom knob (39),
spring washer (38) and spring washer (37) on the screw pump(35) and tightening them up. The other side can be installed as
above.
Step 7
Locking the screws (15), the cushions (11), and the washers (14) into the driver's stand pipes(30),Other screws are operated
in the same step, and tightening and fixing them with an Allen wrench (99). (See the figure for detailed operation)
STEP 7
11
14
15
30
94
59
11
15
14
STEP 6
35
36L
36R
37
38
39
34R
34L
59
35 37 38 39
11