Menzi Muck Menzi IHI 45v4, Руководство оператора

Страница: 96 / 147

MAINTENANCE
45V4 • 55V4 • 60V4 ENG 3-10
MAINTENANCE OF BUCKET
Replace the Tooth
x
It is dangerous if the bucket moves when
replacing the bucket tooth.
Fix the bucket firmly, stop the engine, and set
the gate lock lever to the lock position.
x
Fragment may scatter, resulting in injury. Put
on protective goggles, protective cap and
protective gloves.
x
Replace the tooth when the wear hole appears.
x
Replace the tooth before it wears up to the
adapter.
1. Remove the lock pin.
Remove the tooth.
2. Clean the adapter.
It is recommended that the rubber lock pin should
be replaced every time the tooth is replaced.
4. Attach the rubber lock pin to the nose.
5. Insert the tooth into the nose.
6. Drive the lock pin until it becomes flush with the tooth
surface with a hammer.
If the lock pin is not driven sufficiently, the tooth may
be dislocated.
7. Make sure that the tooth is fixed firmly.
WC-C300090
WC-C300100
WC-C300110
WC-C300120
Wear hole
Tooth
Rubber lock pin
Adapter
Tooth
Lock pin
Nose
Lock pin
Wrong
Lock pin is
too short.
Wrong
Rubber lock pin
Balls sink.
WC-C300130
Lock pin is not driven enough.
Wrong
Lock pin