Menzi Muck Menzi IHI 45v4, Руководство оператора

Страница: 108 / 147

MAINTENANCE
45V4 • 55V4 • 60V4 ENG 3-22
Replace the Engine Oil and Engine Oil Filter
1. Place the container just under the drain port of the
engine.
2. Clean the oil filler cap (2) and around it in order not to
let in foreign matters. Remove the oil filler cap.
3. Remove the drain plug (3) slowly so that oil will not
splash on you. Discharge oil.
4. Check waste oil. If you find a lot of metallic powder,
foreign matters, etc., contact our service office.
5. Turn the filter (4) counterclockwise to detach it using
the filter wrench.
6. Clean dust and foreign matters from the filter
mounting surface.
7. Apply engine oil thinly onto the gasket of a new filter.
8. Attach the filter by rotating towards the right side, and
after the gasket contacts the sealing surface, tighten
sufficiently by hand.
9. Attach the drain plug.
10. Fill the engine with engine oil until the oil level
becomes between the upper limit and lower limit of
the level gauge (1).
11. Idle the engine for several minutes, stop the engine,
and check the level of engine oil 10 to 20 minutes
later. Refill the engine with engine oil up to the
specified level if the oil level is low.
Upper limit
Lower limit
Oil level gauge