Menzi Muck Menzi IHI 45v4, Руководство оператора

Страница: 76 / 147

OPERATION
45V4 • 55V4 • 60V4 ENG 2-44
When Using Breaker
• S Grip specification (standard)
1. Connect the supply side hose to the pipe on the left
side of the arm and the return side hose to the pipe on
the right side.
2. Set the selection valve so that the mark (6) is vertical.
3. Put the pedal lock lever to the free position.
4. Press on the front side of the No. 1 AUX. pedal (1)
thereby activating the breaker.
5. The breaker stops when the foot is removed.
6. If the pedal lock lever is put in the locked position while
pressing the spare pedal towards the front, the
hydraulic pressure is supplied continuously.
• E Grip specification (option)
1. Connect the supply side hose to the pipe on the left
side of the arm and the return side hose to the pipe on
the right side.
2. Set the selection valve so that the mark (6) is vertical.
3. Press the No. 1 AUX. button (3) and operate the
breaker.
It is also possible to operate the breaker by sliding the
No. 1 AUX. proportional lever (2) to the left.
4. The breaker stops when the hand is released.
5. The No. 1 AUX. flow limit switch (4) is used when
supplying the hydraulic pressure continuously.
ON (Lamp lit up): Continuous operation becomes
possible, if the No. 1 AUX one-
touch button is pressed once, it is
possible to continue to supply
compressed oil to the left side
spare piping.
OFF (lamp is off): Released.
Be sure to set the mark on the selector valve as
described above.
If it is set improperly, the machine and/or breaker
may be damaged.
Pedal lock lever
Lock
Unlock
Breaker
model