Menzi Muck Menzi IHI 45v4, Руководство оператора

Страница: 117 / 147

MAINTENANCE
45V4 • 55V4 • 60V4 ENG 3-31
Inspect and Clean Air Cleaner Element
1. Stop the engine.
2. Remove the cover (1), and take out the
outer element (2).
Do not remove the inner element (4).
3. Clean the inside of the cover and the body
(3).
4. From the inside of the element, directly blow
dry compressed air (0.29 to 0.49 MPa (3 to
5 kgf/cm
2
)) above and below along the
crimp of the filter. Maintain an appropriate
spacing (about 50 cm) between the tip of
the nozzle and the filter.
5. Emit light (white light) from the inside of the
element and inspect for damage to the filter.
Do not use the filter if the filter is damaged,
or has pin holes, or has particularly thin
portions, or if the seal portion is damaged.
6. After the cleaning is completed, affix the
element again.
7. Attach with the arrow mark (
Ń
) is towards
the up direction, and fix with a fixing metal
catch.
x
Replace the element with a new one, regardless of the replacement interval, if it is dirty
with lamp soot, soot or oil.
x
Do not pat, hit or drop the element.
Replace Air Cleaner Element
Disassemble the air cleaner in the same manner as inspection and cleaning procedures and
replace the element with a new one.
x
Be sure to stop the engine when carrying out maintenance of the air cleaner.
If it is carried out while the engine is running, dust is sucked and the engine may be
damaged.
x
Put on protective goggles when cleaning the element using compressed air.
Otherwise, dust may be put in your eyes, which is dangerous.