Mennekes AMTRON Premium E, Руководство по установке

Страница: 54 / 412

18
6.3.1 Setting up network connection
The network connection is established either as a direct connection with a LAN cable or as an access point via the WLAN
of the device.
Direct connection
In order to establish a direct connection via LAN, the device and the terminal device (PC / laptop)
must be in the same address area. The IP address of the device is static when the connection is
direct.
IP address: 192.168.0.100
f
Connect the device and the terminal with a LAN cable.
f
Change the properties of the network connection at the terminal:
IPv4 address: 192.168.0.21
IPv4 subnet mask: 255.255.255.0
f
Open the Internet browser. The service interface can be reached at http://192.168.0.100:25000.
As access point
When delivered, the internal WLAN module operates as an access point. This means that the
device makes its own WLAN network available, with which the terminal (PC / laptop / tablet /
smartphone) can be connected.
IP address: 172.31.0.1
The WLAN of the device is secured with WPA2 encryption.
f
Activate WLAN on the terminal.
f
Connect the terminal to the WLAN network of the device.
To do this, enter the WLAN WPA2 key (setup data sheet).
f
Open the Internet browser. The service interface can be reached at http://172.31.0.1:25000
or at http://myamtron.com:25000.
The access point is always active if the device has not been integrated with WLAN in a home network or if no
WLAN network is available.
Setting up network
connection
LAN
As direct con-
nection
Wi-Fi As access point