MEND Technology IS02PROs, Руководство пользователя

Страница: 23 / 40

23
frequency pair. Press HLD again to resume the timer.
To SKIP current frequency pair :
press SKP key to skip the current
frequency pair and move to next
frequency pair.
To LOCK the keypad when running a protocol to avoid accidental change or
stop of the protocol, press both the LEFT and RIGHT keys, a lock sign will
appear that indicates the keypad is locked. Press LEFT and RIGHT keys again
to unlock.
To stop running : press STOP at any time.
The new values will be applied onto the microcurrent output in 3 seconds after
SET. The change of CH1 and CH2 is only valid for current frequency pair. The
change of Current Intensity and Waveform will be carried into next frequency
pair in the protocol if the next frequency pair has the same parameters as the
current frequency pair. All Run Time changes become invalid when this
protocol is finished or stopped.
Batch Protocols
Batch Protocols allows you to add up to 9 protocols and run as a batch.
Protocols will run in order.
To go into Batch Protocols : press
LEFT arrow key to Main Menu and use
UP/DOWN to select Batch Protocols
and press RIGHT arrow to enter; Or
press Key 4 to select and enter Batch Protocols from Main Menu.
Select a slot: There are 9 protocol slots
in the batch. Each slot can be assigned
to any protocol in the IS02. Use
UP/DOWN keys to move the selection
symbol “>” up and down.
Select a protocol for the slot: Press
RIGHT key to enter to the protocol
selection menu