4
PRECAUTIONS
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having
120V, 60Hz.
NOTE:
The AC plug supplied with the unit is polarized to help minimize the possibility
of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or
cut the wide blade. It is the user’s responsibility to have an electrician replace the
obsolete outlet.
AC Plug
AC Outlet
NOTES ON HANDLING:
• When shipping the player, always use the original
shipping carton and packing materials. For maximum
protection, repack the unit as it was originally packed at
the factory.
• Do not use volatile liquids, such as insect spray, near
the player. Do not leave rubber or plastic products in
contact with the player for a long time. They will leave
marks on the finish.
• The top and rear panels of the player may become
warm after a long period of use. This is normal and not
a malfunction.
• When the player is not in use, be sure to remove the
disc and turn off the power.
• If you do not use the player for a long period, the unit
may not function properly in the future. Turn on and use
the player occasionally.
LOCATING THE PLAYER:
When you place this player near a TV, radio or VCR, the
playback picture may become poor and the sound may be
distorted. In this case, move the player away from the TV,
radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it
dry. Do not use any type of solvent, such as thinner or
benzene, as it may damage the surface of the player.
• If you use a chemical-saturated cloth to clean the unit,
follow that product’s instructions.
Warning:
Cleaning and adjustment of lenses and/or other
components of playback mechanism should be performed
by a qualified service technician.
NOTES ON MOISTURE CONDENSATION:
Moisture condensation damages the player. Please
read the following carefully.
• Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the player.
Moisture condensation occurs during the following
cases:
• When you bring the player directly from a cold place to
a warm place.
• When you use the player in a room where you just
turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
• In summer, when you use the player in a hot and humid
place just after you moved the unit from an air
conditioned room.
• When you use the player in a humid place.
Do not use the player when moisture condensation
may occur.
• If you use the player in such a situation, it may damage
discs and internal parts. Remove the disc, connect the
power cord of the player to the wall outlet, turn on the
player and leave it “ON” for two or three hours. After
two or three hours, the player will have warmed up
and evaporated any moisture. Keep the player
connected to the wall outlet and moisture condensation
will seldom occur.
TO OBTAIN A CLEAR PICTURE:
The player is a high technology, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a clear
picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every 1,000
hours of use depending on the operating environment. For
details, contact your nearest dealer.
Содержание MVBD2520-R
Страница 1: ...MVBD2520 R Blu Ray Player User Manual...
