36
D33340 | Date 08/2017
Operation and control
In the menu, you can set:
►
which type of protection (TWW or TWB) should be active (see page 43)
►
if an acoustic signal should be triggered on alarm (see page 51)
5.6
Graph
The GRAPH display provides an overview of the chronological sequence of the set values and
the actual values as a curve.
1. Press the activation key to the
right of the
GRAPH
display.
The display is enlarged and
the temperature profile
shown.
0 4
8 12 16 20 24
°C
40
20
60
80
100
Fr 20.10.2010 20:34
12.09.2012
14.00
16.00
18.00
►
To change the time frame to
be displayed: Press the activa-
tion key next to the
ar-
row symbols. The time frame
to be displayed can now be
changed by turning the turn
control.
0 4
8 12 16 20 24
°C
40
20
60
80
100
Fr 20.10.2010 20:
12.09.2012
14.00
16.00
18.00
►
To zoom the graph in or out:
Press the activation key next
to the magnifying glass sym-
bol. Select whether you want
to zoom in or out (+/–) with
the turn control and confirm
your selection by pressing the
confirmation key.
.2010 20:34
12
To close the graphical representation, again press the activation key which you have used to
activate it.
5.7 Ending
operation
Warning!
Depending on the operation performed, the surfaces in the working
chamber and the chamber load may still be very hot after the appli-
ance is switched off. Touching these surfaces can cause burns. Wear
heat-resistant protective gloves or wait until the appliance cools
down.
1. Switch off active appliance functions
(turn back the set values).
2. Remove the chamber load.
3. Switch off the appliance (Fig. 23 ).
ON
O
O
ON
N
N
N
O
O
N
O
Fig. 23
Switch off appliance
