5. Menu Navigation
Language
English
Language selection
French
German
Spanish
Japanese
Czech
Quick Config
G3510
Quick Configurator for Product Versions
(2 = 2D, 3 = 3D) (10 = 10mm, 40 = 43mm)
G2510
G3540
G2540
Visible Diodes
Mode
Normal
Green ON when the detectors are triggered and the doors are
open/opening. Flashing red when the doors are closing and
solid red when closed.
External Inp.
Enables control of the visible diodes by the open and close
door signals. Choose whether this is activated by the rising or
falling edge of an external signal (see Section 6 for details).
Demo
Continual demo sequence of green and red diodes.
Trigger
Visible diodes will change from green to red when the
detectors are triggered.
Test
For internal use only.
Off
Turns off visible diodes.
Sides
Both On
This controls which detector, either TX or RX have their visible
diodes ON or OFF. The default is both TX and RX visible
diodes ON.
TX only ON
RX only ON
Ext. Inp. Open
Rising Edge
Door open signal rising or falling edge signal (see Section 6 for
details).
Falling Edge
Ext. Inp. Close
Rising Edge
Door closing signal rising or falling edge signal (see Section 6
for details).
Falling Edge
Green On Time
Sets green diodes on time (10 to 1000s)
Red On Time
Sets red diodes on time (2 to 1000s). Note: flashing/solid
combined on time.
