Installation manual
M-WRG-S/Z-T(-F, -FC)
- 5 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
2.2
Notes on using the ventilation units safely
CAUTION
—
Starting and using the ventilation unit
► Do not start up the ventilation unit until it is fully installed.
► Always make sure that the cover is closed and locked in place before using the venti-
lation unit.
2.3
Intended use
—
The intended use includes compliance with all the notes in the installation manual.
—
The ventilation unit must not be operated without a filter.
—
For any use contrary to the intended use, Meltem Wärmerückgewinnung GmbH & Co. KG
shall accept no liability for any damage that may occur and offers no warranty that the
components will work perfectly and correctly.
3 Warranty and liability
The warranty and liability shall be void if the ventilation unit or InControl pushbutton sensor is not
connected as described in this installation manual.
4 Terminal assignment
4.1
Board with terminal blocks
Fig. 2: Terminal assignment on the board with terminal blocks
RJ45
LED OUT
IN
IN
LED OUT
– +
