Meltem InControl, Руководство по установке

Страница: 3 / 12

Installation manual
M-WRG-S/Z-T(-F, -FC)
- 3 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
info@meltem.com · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
1 Introduction
1.1 Notes on this installation manual
This installation manual contains important information that should be followed when connecting
the M-WRG-S/Z-T, M-WRG-S/Z-T-F and M-WRG-S/Z-T-FC ventilation units to the InControl push-
button sensor.
► Read all the instructions carefully before installing to avoid possible risks and mistakes.
► When installation is complete, give these instructions to the home owner, caretaker or
property manager.
► These instructions are part of the product. Keep the instructions in a safe place for future
reference.
WARNING
► Follow ALL danger and warning instructions and notes on precautionary measures.
► Read section „2 Safety instructions“ on page 4 carefully.
NOTE
► Also follow the M-WRG-S.../M-WRG-K... installation manual, part no. 5300-10-01, for in-
stalling the ventilation units.
1.2 Description
This manual describes how to connect the M-WRG-S/Z-T, M-WRG-S/Z-T-F and M-WRG-S/Z-T-FC
ventilation units to the InControl pushbutton sensor.
Item Part number
M-WRG-S/Z-T ventilation unit 5016-1-1
M-WRG-S/Z-T-F ventilation unit 5016-1-1-1
M-WRG-S/Z-T-FC ventilation unit 5016-1-1-2
InControl pushbutton sensor 5047-...
Fig. 1: InControl pushbutton sensor and board with terminal blocks in the ventilation unit
CO²