3.1. Before use:
3.1.1. Remove the appliance’s protective film(if ap-
plicable).
3.1.2. Before using the product for the first time,
clean the parts that will come into contact with food
in the manner described in the cleaning section.
3.2 Use and care:
3.3 Use: General notes
3.3.1. Place your microwave on a heat resistant
surface.
3.3.2. To ensure sufficient ventilation, the distance
of the back of microwave to the wall should be at
least 10 cm, the side to the wall should be at least 5
cm, the free distance above the top surface at least
20 cm. the distance of the microwave to the ground
should be at least 85 cm.
3.3.3. The position of the oven shall be such that it
is far from the TV, Radio or antenna as picture distur-
bance. The distance should be more than 5m.
3.3.4. The appliance must be positioned so that the
plug is accessible.
3.3.5. The microwave oven must be operated with
the door closed.
3.3.6. The microwave oven must not be placed in a
cabinet. The microwave oven is intended to be used
freestanding.
3.3.7. As there is manufacturing residue or oil
remained on the oven cavity or heat element, it usu-
ally would smell the odour, even a slight smoke, It is
normal case and would not occur after several times
use, keep the door or window open to ensure good
ventilation. So it is strongly recommended to place
a cup of water in the turntable, setting at high power
and operate for several times.
3.3.8. Do not operate the microwave without the
turntable assembly.
3.3.9. Blocking the intake and/or outlet openings can
damage the oven.
3.3.10. Do not remove the light brown Mica cover
that is attached to the oven cavity to protect the
magnetron.
3.4 Use: Before cooking
3.4.1. When you plug your microwave into the power
socket, the LED will flash 3 times. Thereafter the
semicolon will flash, prompting you to input the cook-
ing menu and time.
3.5 Use: Setting the current time
3.5.1. The Preset/Clock button allows you to input
the current time. You can program the time when
the “:” flashes onto the LED display after plugging
the microwave in. it is not necessary to program the
current time
Steps
Display
1
After plugging
the microwave
in, the colon
flashes
:
2
Press the
Preset. Clock
button once
00:00
3
Turn the
Auto
Cooking/ Time.
Weight
knob
to set the exact
hour.
12:00
4
Press the
Preset. Clock
button once
again.
12:00
5
Turn the
Auto
Cooking/ Time.
Weight
knob
to set the exact
minutes.
12:00
6
Press the
Preset. Clock
button once
again or wait
for 5 seconds.
3.6 Use: Express function
3.6.1. Press the Express button.
3.6.2. The LED Display will cycle to show either 0:30,
1:00, 1:30.
3.2.1. Unroll the power cord completely before plug-
ging it in.
3.2.2. Place your appliance on a flat, dry, stable and
heat resistant surface.
Example: to set 12:30