Mellanox Technologies Vantage 8500, Руководство по установке

Страница: 25 / 83

Rev A04
Mellanox Technologies 25
• Contains two 24-port Switch ASICs
• LED Indicators – For LED assignments see See “Line Board (sLB-1024) LED Indicators” on
page 76.
1.5.3 Fabric Boards (sFB-8500)
• Up to 4 Fabric boards per chassis
• 4 boards required for non-blocking
• Contains 3 switch ASICs
• LED Indicators – For LED assignments see See “Fabric Board (sFB-8500) LED Indicators”
on page 76.
1.5.4 Management Board (sMBE)
• Provides Chassis and Fabric Management
• I2C communication between all hardware components
• Temperature and voltage monitoring; fan rate control
• Requires Fabric Board in adjacent slot
• RS-232 and I2C Interfaces
• LED Indicators – For LED assignments see See “Management Board (sMBE) LED Indica-
tors” on page 78.
1.5.5 Control Panel sCTRL
• Rear panel access to management interfaces
• RS232 Serial Console — 2 DB9 connectors
• Ethernet Management — 2 RJ45 connectors up to 100Mbps
• Reset Button
• Reset Button
• Press 1-6 seconds for soft reset
• Press for more than 6 seconds for hard reset
• LED Indicators – For LED assignments see See “Control Board (sCTRL) LED Indicators” on
page 79.
1.5.6 Fan Modules
• Vertical (sFU-4) & Horizontal (sFU-8E) Fan Units
• Hot pluggable; Normal and Turbo fan speeds
• sFU-8E LED Indicators
• Temp
It is required that you use blank panels (for line, fabric, and management
boards) when a card is not present.