Hardware Installation
Rev 1.0
Mellanox Technologies
16
•
The 2 fiber washers saved from the removal of the bracket
3.4.1
Removing the Existing Bracket
Figure 3: Bracket Screws
1. Remove the two screws holding the bracket in place. The bracket comes loose from the card.
2. Save the two screws and the two fiber washers.
3.4.2
Installing the New Bracket
1. Place the bracket onto the card until the screw holes line up. See
Figure 3
.
2. Screw on the bracket using the screws and washers saved from the bracket removal proce-
dure above.
Be careful not to put stress on the LEDs.
Do not force the bracket onto the card. You may have to gently push the LEDs using a
small screwdriver to align the LEDs with the holes in the bracket.
Screws
Mellanox Technologies Confidential
