Mellanox Technologies Innova IPsec, Руководство пользователя

Страница: 58 / 68

Rev 1.8 58 Mellanox Technologies
A.4 Software, Firmware and Tools Update
Step 1.
To download the bundle, please refer to www.mellanox.com => Products => Smart-
NICs => Innova IPsec => FW & SW
 To install the most updated kernel:
Step 1.
Locate the RPM files in the Kernel folder:
• rpm -i kernel-<kernel_version>.rpm
• rpm -i kernel-devel-<kernel_version>.rpm
Step 2.
Reboot your system and select the relevant kernel to load from the grub menu.
For further details, please refer to
Chapter 5,“IPsec Offload Software Installation and Oper-
ation” on page 25.
 To update MFT:
Step 1.
Untar the MFT tar file.
Step 2.
Install MFT by running:
Step 3.
Start MFT:
Step a. modprobe mlx5_fpga_tools
Step b. mst start --with_fpga
Step c. mst status
 To update the FPGA image:
Step 4.
In the bundle folder/directory look for the installation script: mlnx_fpga_updater.sh
Step a. The script is located in <downloaded bundle folder >/Scripts
Step b. Once you have the script you can run it in the following ways:
install.sh
# modprobe mlx5_fpga_tools
# mst start --with_fpga
# mst status
MST modules:
------------
MST PCI module is not loaded
MST PCI configuration module is not loaded
MST devices:
------------
No MST devices were found nor MST modules were loaded.
You may need to run 'mst start' to load MST modules.
FPGA devices:
-------------------
/dev/mst/mt4117_pciconf0_fpga_i2c
/dev/mst/mt4117_pciconf1_fpga_rdma
a
a. It is recommended to use the RDMA device as it uses the fast path to the FPGA. I2C is used for
recovery purposes when RDMA is not functional.