Rev 1.8
44
Mellanox Technologies
7
Updating Mellanox Innova IPsec Adapter Card Firmware
Each card is shipped with the latest version of qualified ConnectX-4 Lx firmware at the time of
manufacturing. However, Mellanox issues firmware updates occasionally. Please contact Mella-
nox for the correct Firmware version.
Firmware can be updated on the stand-alone single card using the
flint
tool of the
Mellanox
Firmware Tools (MFT)
package. Please contact Mellanox for the correct MFT package.
The following steps describe how to retrieve the PSID (firmware identification) and programmed
firmware version of your adapter card. They also describe how to update the card with the latest
firmware version available.
1. Retrieve the PSID and firmware version:
a. Install the MFT package.
b. Enter: mst start.
c. Get the Mellanox
mst device name
using the command "mst status". The mst device name will be
of the form: /dev/mst/mt4117_pciconf0.
d. Get the PSID (firmware identification) and programmed firmware version using the command '
flint -d <mst device> q', where <mst device> is the device retrieved in step c.
2. To burn the new FW image to ConnectX-4 Lx flash:
a. Install mst package and start mst as in section 1 above
This section applies only when updating the ConnectX-4 Lx firmware. In order to burn and
update the FPGA image, please refer to
Chapter 6,“mlx_fpga Tool” on page 41
The shown versions and/or parameter values in the example below may not reflect the latest or actual values
for this product, and are included here for illustration purposes only.
flint -d /dev/mst/mt4117_pci_cr0 q
Image type: ConnectX-4 Lx
FW Version: 14.12.1000
Device ID: 4117
Chip Revision: 0
Description: Node Port1 Port2
Sys image
GUIDs: 000002c900000200 000002c900000201 000002c900000202
000002c900000203
MACs:
000002c90200 000002c90201
Board ID: (MT_2410110034MT_2490110032)
VSD:
PSID:
MT_2410110034MT_2490110032
Содержание Innova IPsec
Страница 1: ...Mellanox Technologies www mellanox com Mellanox Innova IPsec Ethernet Adapter Card User Manual Rev 1 8...
Страница 53: ...Specifications Rev 1 8 53 Mellanox Technologies Figure 5 Mechanical Drawing of MNV101512A BCIT 167 65 68 90...
Страница 54: ...Rev 1 8 54 Mellanox Technologies 9 5 Bracket Mechanical Drawing Figure 6 Single Port Tall Bracket 21 6 120 02...
Страница 55: ...Specifications Rev 1 8 55 Mellanox Technologies Figure 7 Single Port Short Bracket 80 3 22 83...
