Mellanox Technologies Innova IPsec, Руководство пользователя

Страница: 46 / 68

Rev 1.8 46 Mellanox Technologies
8 Troubleshooting
• See “General” on page 46.
• See “Linux” on page 47.
8.1 General
Server unable to find the
adapter
• Ensure that the adapter is placed correctly
• Make sure the adapter slot and the adapter are compatible
• Install the adapter in a different PCI Express slot
• Use the drivers that came with the adapter or download the latest
• Make sure your motherboard has the latest BIOS
• Try to reboot the server
The adapter no longer
works
• Reseat the adapter in its slot or a different slot, if necessary
• Try using another cable
• Reinstall the drivers for the network driver files may be damaged or deleted
• Reboot the server
Adapters stopped
working after installing
another adapter
• Try removing and re-installing all adapters
• Check that cables are connected properly
• Make sure your motherboard has the latest BIOS
Link indicator light is off
• Ensure that adapter driver/s is loaded
• Try another port on the switch
• Make sure the cable is securely attached
• Check you are using the proper cables that do not exceed the recommended
lengths
• Verify that your switch and adapter port are compatible
Link light is on, but with
no communication
established
• Check that the latest driver is loaded
• Check that both the adapter and its link are set to the same speed and duplex set-
tings
FPGA not found on mst
status
• Verify the Mellanox Innova IPsec kernel is loaded
• Load mlx5_fpga_tools module
• Start mlx_fpga tool
uname -r
modprobe mlx5_fpga_tools
mst start --with_fpga
mst status
• Reinstall MFT