manualshive.com logo in svg

Mellanox Technologies ConnectX-3 MCX312A-XCBT, Руководство пользователя

Поделиться
Скачать
Mellanox Technologies ConnectX-3 MCX312A-XCBT Скачать руководство пользователя страница 28

Driver Software and Firmware

Rev 1.4

Mellanox Technologies

28

4.3.1 Hardware and Software Requirements

Software:
• Mellanox OFED 1.5.1 or WinOF 2.1.2 or later. To download these packages go to 

www.mella-

nox.com

 => Products => Software/Drivers => InfiniBand & VPI SW/Driver. 

Hardware:
• ConnectX®-3 EN adapter card

4.4

Updating Adapter Card Firmware

Each card is shipped with the latest version of qualified firmware at the time of manufacturing. 
Firmware is updated occasionally, and the most recent firmware can be obtained from:

 

http://www.mellanox.com 

=> Support => Download Firmware. Check that the firmware on your 

card is the latest found on the Mellanox site, if not update to the latest version found on the Mella-
nox web site.

Firmware can be updated on the stand alone single card using the 

flint

 tool of the 

Mellanox Firm-

ware Tools (MFT)

 package. This package is available for download, along with its user manual, 

from the Mellanox Firmware Tools page. See 

http://www.mellanox.com

 => Support => Download 

Firmware Tools.

A firmware binaries table lists a binary file per adapter card. The file name of each such binary is 
composed by combining the firmware name, the firmware release version, and the card part num-
ber. Please contact Mellanox System Support if you cannot find the firmware binary for your 
adapter card.

The following steps describe how to retrieve the PSID (firmware identification) and programmed 
firmware version of your adapter card. They also describe how to update the card with the latest 
firmware version available.
1.

Retrieve the PSID and firmware version:

 a. Install the MFT package. The package is available at 

www.mellanox.com 

=> Products => 

Software/Drivers => Ethernet Software/Drivers => Firmware Tools. Make sure to download 
the package corresponding to your computer’s operating system.

 b. Enter: mst start.
 c. Get the Mellanox 

mst device name

 using the command "mst status". The mst device name will be of 

the form: /dev/mst/mt4099_pci_cr0.

 d. Get the PSID (firmware identification) and programmed firmware version using the command. 

Содержание ConnectX-3 MCX312A-XCBT














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды