ConnectX®-3 Ethernet Dual SFP+ Port Adapter Card User Manual
Rev 1.4
Mellanox Technologies
25
4
Driver Software and Firmware
4.1
Driver Software
4.1.1 Linux
For Linux, download and install the latest MLNX_EN driver software package available via the
Mellanox web site at:
http://www.mellanox.com
=> Products => Software/Drivers => Ethernet
SW/Drivers => ConnectX®-3 EN 10/40GigE Linux Driver => Download. Follow the installation
instructions included in the download package (also available from the download page). To ensure
that communication has been established follow the instructions below.
Check the link status
First check the network interface name by running the “ifconfig –a” command
To assign an IP address to the interface run:
> ifconfig eth<x> <ip>
where 'x' is the OS assigned interface number.
To check driver and device information run:
> ethtool -i eth<x>
Example:
> ethtool -i eth2
driver:mlx4_en (MT_1020110019_CX-3)
version: 1.5.6.33 (Oct 2011)
firmware-version:2.10.0000
bus-info: 0000:07:00.0
4.1.2 Windows
For Windows, download the MLNX EN – Ethernet driver. Download this package from the Mella-
nox web site at:
http://www.mellanox.com
=> Products => Software/Drivers => Ethernet SW/
Drivers => ConnectX® EN 10GigE Windows Driver => Download. Follow the installation
instructions included in the download package (also available from the download page). To ensure
that communication has been established follow the instructions below.
Содержание ConnectX-3 MCX312A-XCBT
Страница 1: ...www mellanox com ConnectX 3 Ethernet Dual SFP Port Adapter Card User Manual P N MCX312A XCBT Rev 1 4...
Страница 20: ...Adapter Card Interfaces Rev 1 4 Mellanox Technologies 20...
Страница 33: ...ConnectX 3 Ethernet Dual SFP Port Adapter Card User Manual Rev 1 4 Mellanox Technologies 33...
Страница 36: ...Rev 1 4 Mellanox Technologies 36 B 3 SFP Connector Pinout Figure 13 Rear View of Module With Pin Placement...
