ConnectX®-3 Ethernet Dual SFP+ Port Adapter Card User Manual
Rev 1.4
Mellanox Technologies
21
3
Ethernet Adapter Card Installation
3.1
Hardware Requirements
A system with a PCI Express x4 or x8 slot is required for installing the card.
3.2
Installation Instructions
Read all installation instructions before connecting the equipment to the power source.
To change a tall bracket to a short bracket see Replacing a Tall Bracket With a Short
Bracket on page 38.
The adapter cards listed above are standard PCI Express cards, each with a standard x8 edge con-
nector. The cards require a PCI Express x4 or x8. Please consult the host machine documentation
for instructions on how to install a PCI Express card.
If the card is installed in a PCI slot with less lanes than the card requires then the adapter
card will not provide the optimum data transfer.
3.3
Identify the Card in Your System
3.3.1 On Windows
1.
Open Device Manager on the server. Click start => Run, and then enter “devmgmt.msc”.
2.
Expand System Devices and locate your Mellanox ConnectX-3 adapter card.
3.
Select Properties to display the adapter card properties window.
4.
Click the Details tab and select
Device Instance Id
(Windows 2003) or
Hardware Ids
(Windows 2008/R2) from the Property pull-down menu.
Содержание ConnectX-3 MCX312A-XCBT
Страница 1: ...www mellanox com ConnectX 3 Ethernet Dual SFP Port Adapter Card User Manual P N MCX312A XCBT Rev 1 4...
Страница 20: ...Adapter Card Interfaces Rev 1 4 Mellanox Technologies 20...
Страница 33: ...ConnectX 3 Ethernet Dual SFP Port Adapter Card User Manual Rev 1 4 Mellanox Technologies 33...
Страница 36: ...Rev 1 4 Mellanox Technologies 36 B 3 SFP Connector Pinout Figure 13 Rear View of Module With Pin Placement...