Melitta E 970-101, Руководство по эксплуатации

Страница: 174 / 182

172
10 Inserting, changing and removing the water filter
A Melitta
®
Claris
®
water filter is supplied with the appliance for filtering
out limescale and other contaminants. Using the filter helps to reduce the
required frequency of descaling. The service life of your appliance will be
extended thanks to the reliable protection from limescale. The water filter
should be changed regularly, however; at the latest, when the appliance
prompts you to do so. When the water filter is inserted, changed or remo -
ved, this must be confirmed in the Filter sub-menu. Once the water filter is
inserted or changed, the appliance resets the water filter cycle to zero and
is able to prompt you to change the water filter again at the right time.
10.1 Inserting the water filter
Note
Put the water filter in a glass with fresh tap water for several mi -
nutes before you insert it.
•
Select the Care sub-menu.
•
Turn the rotary switch until Filter is high -
lighted and press it to confirm the selection.
•
Turn the rotary switch until Insert filter is
highlighted and press it to confirm the selec -
tion.
•
Turn the rotary switch until Start is high -
lighted and press it to confirm the selection.
•
Lift the lid of the water tank (Fig. A, No. 6)
and pull the water tank up and out of the
appliance.
• Carefully screw the Melitta
®
Claris
®
water
filter into the thread on the base of the water
tank using the screw-in aid at the bottom end
of the coffee scoop provided.
Care
Filter
Descaling
Exit
Filter
Insert filter
Exit
Change filter