Melitta Cafina XT8, Руководство по эксплуатации

Страница: 23 / 40

7�4 Menu option "Selection"
Here you can select which pre-programmed products are
displayed for dispensing.
000301 SELECTION
PRODUCT
FILTER UNIT
1 Espresso
***
2 Café Crème
9 Steam
4 Hot water
7 Latte Macchiato
5 Ristretto
***
Cappuccino
8 Milk foam
cold
Cappuccino
PRODUCT OPERATION
Waiter operation Self-service operation Quick start
...
Release
Display
receptacle
Create new
group
Create new
product
Logout
Change colour
1
3
4
5
6
2
7
Fig. 32: Menu option "Selection"
For self-service and waiter operation, and for the quick
start buttons, you can manage or create different
dispensing products and product groups. You therefore
always need to start by selecting the operating mode (1)
for which you would like to create, delete, or edit products
or product groups.
7�4�1 Product groups
In self-service and waiter operation, you have the option
to group related products together. This means you can
display and output more than ten assigned products.
7�4�2 Creating product groups
1. On the display, press the "Create new group"
button (4).
͵
A new group appears on the display.
2. To name the group, press the button for the first or
second line of the name (2).
͵
A new window opens.
000162
Name selection
Cancel OK
Group name Group name
Language selection
Name line 1
Category models Category models
Name line 2
Milk
Hot water
Speciality
Milk
Hot water
Speciality
4
3
2
1
Fig. 33: Selecting or entering a name
3. Under "Language selection" (4), select the language
that should be used for the name.
͵
You can adjust the languages available for se-
lection under the machine settings (see chap-
ter 7.7.3 on page 28).
4. Select one of the following options to enter a name
for the line in question:
•
Select a default name: Under "Category
models" (2), select a category and then select a
name from the list below (1).
•
Enter your own name: Press the corresponding
line (3) and enter a name using the screen
keyboard (see chapter 7.2 on page 22).
5. Confirm the name with the "OK" button.
6. Press the "Release" button (3) (see Fig. 32) to activate
the created group for dispensing.
͵
If you do not release the group, it will not be dis-
played on the dispensing interface.
9
The new product group has been created.
Settings
23
28514 • 20170301
7