4. Position the steam wand over the drip grid.
5. Then press the button for steam dispensing again to
blow out the steam line.
6. Clean the outside of the steam wand immediately
with a clean and damp cloth to remove milk residues.
9
The steam dispensing operation is complete.
6�5�2
Steam wand with Steam Control Plus
000264
1
2
3
4
Fig. 21: Dispensing Steam Control Plus
1. Place the cup containing milk (3) underneath the
steam wand (2) on the drip grid (4) so that the steam
nozzle is fully submerged in the milk.
͵
Touch the steam wand on the handle (1) only.
2. Press the button on the display for dispensing Steam
Control Plus.
͵
The preparation process starts and the current
temperature of the milk is shown on the display.
3. Remove the cup from underneath the steam wand as
soon as the preparation process is complete.
The request "Blow out steam lance" is shown on the
display.
000295
Blow out steam lance
Start
Close
Please remove the container before starting.
Fig. 22: Blow out steam lance
4. Position the steam wand over the drip grid.
5. Confirm the request with "Start" to blow out the
steam line.
6. Clean the outside of the steam wand immediately
with a clean and damp cloth to remove milk residues.
9
The Steam Control Plus dispensing process is
complete.
If you wish to use Steam Control Plus again for product
dispensing straight away, you can interrupt the steam
wand blow-out process by pressing "Close".
6�6
Dispensing milk foam via wand (option)
Depending on the equipment, a milk foam wand may be
available instead of a steam wand. With the milk foam
wand, you can add milk foam to your products separately.
1. Position the cup for the milk foam underneath the
milk foam wand on the drip grid.
2. On the display, press the button for dispensing milk
foam.
9
The product is dispensed.
Dispensing products
18
28514 • 20170301
6
