Melitta Caffeo Varianza CSP, Руководство по эксплуатации

Страница: 95 / 250

Transport, storage and disposal
95
ENGLISH
Problem Cause Action
The My Bean Select
display goes out
when the measuring
spoon is put back on.
There are less than 8
g of coffee beans in
the bean chute.
ƒ
Top up coffee beans (see sec-
tion 5.1 one page 73).
Fill beans appears on
the display although
the bean container
is full.
Coffee beans do
not drop into the
grinder.
ƒ
Press a direct key.
ƒ
Tap lightly on the bean container.
ƒ
Clean the bean container.
ƒ
Coffee beans too oily. Use different
coffee beans.
Loud grinder noise. Foreign object in the
grinder.
ƒ
Contact the hotline.
Brewing unit cannot
be inserted after
removing.
Handle for the
locking mechanism
of the brewing unit
is not in the correct
position.
ƒ Check that the handle for the
locking mechanism is correctly
engaged (see section 9.3 one
page 87).
Drive is not in the
correct position.
ƒ
Press and hold the "Coffee
strength" button. Also press the
ON/OFF button. The appliance
initialises. Release buttons again.
System error appears
on the display.
Software problem.
ƒ
Switch the appliance off and
on again (see section 4.1 one
page 64).
ƒ
Contact the hotline.
11 Transport, storage and disposal
11.1 Venting the appliance
We recommend venting the appliance when it is not used for a long period,
prior to transport and when there is a risk of frost.
During venting, residual water is removed from the appliance.
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
3. Navigate to the System > Venting menu.
4. Select Start using the arrow buttons and confirm with "menu/ok".
5. Follow the further instructions on the display.
» The appliance switches off.