![background image](http://html1.mh-extra.com/html/melissa/16690071/16690071_manual_1767850042.webp)
2.2 After 1 second, you can see the measurement
result.
When LCD is flashing, we are waiting for starting
measurement.
Note: If you did not hear the beep sound, which repre-
sents the temperature measurement has not yet been
completed. Please do not remove the thermometer
probe from forehead at this time. (If you have closed
the sound indication, it will have no sound indication.)
3. Object pattern measurement
The installation of the head cover of forehead tem-
perature has no influence to object pattern measure-
ment.
3.1 Long press Power button (5) to enter the object
measurement mode for 6 seconds, and then aim
the thermometer at the object, the temperature
of the target object can be measured directly by
pressing Measurement button (3).
3.2 After 1 second, you can see the result of the
measurement.
When LCD is flashing, we are waiting for starting
measurement.
Note: If you did not hear the beep sound, which repre-
sents the temperature measurement has not yet been
completed. Please do not remove thermometer probe
from target object at this time. (If you have closed the
sound indication, it will not have sound indication.)
CLEANING INSTRUCTIONS
In order to ensure the precise measurements, it rec-
ommended to clean the device after each use.
42
UK