20
UK
MAIN COMPONENTS
1. Door
2. Window
3. Light button
4. Display
5. Temperature up
6. Temperature down
7. Clip
8. Feet
9. Drip tray
PREPARATION
• Unpack the appliance and remove all
the packaging from it.
• Wipe the refrigerator compartment
with a well-wrung cloth.
• The appliance must stand upright
and be left for at least 2 hours before
plugging it in, otherwise the cooling
system may develop a fault due to
transport and handling.
1
2
3 4 5 6
7
8
9
• Place the appliance in the desired
location and adjust the front feet if
necessary so that it is completely
level and cannot tip over.
• Place the spacer between the back of
the appliance and the wall to ensure
sufficient air circulates around the ap-
pliance.
USE
• The temperature of the appliance can
be set between 11 and 18 °C. How-
ever, the appliance can cool no more
than 14° below the ambient tempera-
ture.
• The current temperature of the appli-
ance is shown on the display (4).
• Adjust the temperature by pressing
the adjustment buttons (5, 6).
• Turn the light in the appliance on and
off by pressing the button (3).
