Meler PS20, Инструкция по эксплуатации, Страница: 13 / 100

INTRODUCTION
2-3
MA-5130-GBR PS20 NON STOP DRUM UNLOADER INHIBITION MANUAL
Both modes can select the rotational speed by external or internal
signal. If select the internal signal choose the rotational speed between
0 and 100 rpm. If select the external signal choose 0-10V.
Standby mode _The melting equipment remains in a standby status,
with the element temperatures kept at a value (programmable) that is
below the preselected value. The pump remains deactivated.
Alarm mode _The melting equipment detects a malfunction and warns
the operator. The pump remains deactivated.
Stopped mode _The melting equipment remains off, without heating
the elements and with the pump deactivated.
Identifying the melting equipment
When ordering replacement parts or requesting assistance from our technical
support department, you must know your melting equipment’s model and
reference numbers.
This and other technical information may be found on the identification plate,
located on the electrical cabinet on the side of the melting equipment.
Power supply/Alimentación
Serial No./Nº Serie
Ref.
M
ade i
n
E.
U
.
Outputs/Salidas Date/Fecha
ww
w.
m
ele
r.e
u